← Back to Articles

Collaborative Robot Hand Guiding: Safety Limits and Sensitivity

November 18, 2026

Why Hand-Guiding Safety Limits and Sensitivity Matter for Buyers

Hand guiding is a core collaborative robot (cobot) function that allows operators to physically move the robot arm for teaching or task execution. For OEMs and integrators, the safety limits and sensitivity of this feature directly affect usability, cycle time, and compliance with ISO/TS 15066. When sourcing hand-guiding components or complete cobot systems in volume, you must specify these parameters precisely to avoid costly integration issues and safety certification delays.

Key Safety Limits to Specify

Hand-guiding safety is governed by limits on force, torque, speed, and power. Before ordering, define the following:

  • Force and torque limits: The maximum force and torque the robot can exert during hand guiding, typically derived from ISO/TS 15066 body-region thresholds. Specify values for quasi-static and transient contact. Ensure the supplier provides test data or certification.
  • Speed and power limits: Maximum Cartesian speed and mechanical power during hand guiding. These must align with your risk assessment and the robot's safety-rated monitoring functions.
  • Stopping distance and time: Critical for safety-rated stop functions. Request validated stopping performance under maximum load and speed.
  • Safety-rated inputs/outputs: Number and type of safety I/O for integrating external safety devices (e.g., enabling switches, presence sensing).

Sensitivity Parameters That Affect Usability

Sensitivity determines how responsive the robot is to operator input. Too low, and the operator must exert excessive force; too high, and the robot may move unexpectedly. Specify:

  • Force/torque sensor resolution and accuracy: Affects the minimum detectable force and the fidelity of guided motion. Look for resolution in the range of 0.1 N and 0.01 Nm for precise tasks.
  • Control loop rate: Higher rates (e.g., 1 kHz) enable smoother, more responsive hand guiding.
  • Admittance or impedance parameters: Adjustable stiffness and damping allow tuning for different payloads and tasks. Ensure the controller supports a range wide enough for your applications.
  • Gravity compensation: Must be automatic and accurate across the workspace to prevent drift when the operator releases the arm.

What to Check Before Ordering

When evaluating suppliers, especially Chinese factories, verify the following:

  • Certification and test reports: Demand ISO 10218-1 and ISO/TS 15066 compliance documentation. For hand-guiding force limits, request third-party test reports.
  • Sensor quality: Force/torque sensors are critical. Ask for calibration certificates and lifetime data. Chinese suppliers may use domestic or imported sensors; clarify which and request MTBF figures.
  • Controller compatibility: Ensure the hand-guiding interface (e.g., EtherCAT, analog) matches your control architecture. Check firmware version and update policy.
  • Environmental ratings: IP rating for the sensor and arm, operating temperature range, and EMI/EMC performance for industrial environments.
  • Payload and reach: Confirm that sensitivity and safety limits are specified at your intended payload and reach, not just at nominal conditions.

Cost Considerations

Hand-guiding capability adds cost through sensors, safety controllers, and certification. For volume orders:

  • Sensor cost: Force/torque sensors can account for 20-30% of the cobot cost. Domestic Chinese sensors are often cheaper but may have lower resolution or reliability; balance cost against performance needs.
  • Safety controller: Safety-rated controllers and I/O add cost but are non-negotiable for compliance. Avoid suppliers that cut corners here.
  • Certification costs: If the supplier already holds certifications, you save on testing. Confirm that certificates cover your configuration.
  • Volume pricing: Chinese factories typically offer tiered pricing. Negotiate based on annual volume and request quotes for 50, 100, and 500 units.

Sourcing Tips from Chinese Factories

  • Request a sample for hands-on testing: Evaluate sensitivity and safety limits in your own lab. Test force thresholds, drift, and responsiveness under load.
  • Audit the factory: Check production line testing for force/torque sensors and safety functions. Ask for calibration procedures and end-of-line test records.
  • Clarify customization options: Many Chinese suppliers can adjust sensitivity parameters or integrate specific sensors for volume orders. Discuss firmware customization and MOQs.
  • Check after-sales support: Ensure spare parts availability and technical support for safety-related issues. A local distributor or support team is a plus.
  • Beware of unrealistic specs: Very low prices may indicate inadequate safety testing. Cross-check specifications with independent test data.

Bottom Line

Hand-guiding safety limits and sensitivity are not just technical detailsโ€”they are critical purchasing criteria. Specify force/torque limits, speed, and sensitivity parameters based on your risk assessment. Demand certification and test reports, and validate performance with samples. When sourcing from Chinese factories, balance cost against proven safety and sensor quality. A well-specified hand-guiding system will reduce integration time, ensure compliance, and improve operator efficiency.

๐Ÿข Verify Chinese Suppliers

Reviewed & ranked robot parts manufacturers for global buyers

Find Suppliers โ†’
๐Ÿ›’ Looking for a specific part?

Post a free RFQ & get supplier quotes

Post an RFQ โ†’